Basic Control Schemes for Three-Phase Inverters in Photovoltaic Applications
DOI:
https://doi.org/10.68050/JAMS.2026.611Keywords:
three-phase inverters, power drives, photovoltaic systems, induction motors, Energy optimizationAbstract
This paper describes some basic control schemes that have been used to optimize the electrical energy consumed by various applications that require the use of electrical machines for their operation, specifically induction motors (such as machinery actuators, electric vehicles, hydraulic pumps, servovalves, robots, etc.) powered by a photovoltaic system. From a practical prototyping perspective, the goal is to use new technologies to implement the designed control techniques through the use of modern components such as 32-bit open-architecture microcontrollers, microcomputers, or FPGAs.
References
1. Boglietti, A.; Cavagnino, A.; Ferraris, P. and Lazzari, M. (2008). Energy-Efficient Motors. IEEE Industrial Electronics Magazine, vol. 2, n. 4, pp. 32-37.
2. Boglietti, A.; Lazzari, M. and Profumo, F. (1986). About the selection of induction motors samples having representative character for energetic considerations. Proceedings of
3. International Conference on Electrical Machines (ICEM), pp. 223–226, Munchen, Germany.
4. Bonnett, A.H. (1994). An Update on AC Induction Motor Efficiency. IEEE Transactions on Industry Applications, vol. 30, n. 5, pp. 1362-1372.
5. Bonnett, A. H. and Yung, C. (2008). Increased Efficiency versus Increased Reliability. IEEE Industry Applications Magazine, pp. 29-36.
6. Calzada-Lara, G. (2026). Elementos para la optimización del Control Directo del Par (DTC) aplicado a los motores de inducción. Tesis de Maestría, CIEP-FI, Universidad Autónoma de San
Luis Potosí, S.L.P., México. Zenodo. https://doi.org/10.5281/zenodo.22596039
7. Kaboli, S.; Zolghadri, M.R.; Roye, D. and Emadi, A. (2004). Online Optimal Flux Controller for DTC Based Induction Motor Drives. Proceedings of the 30th Annual Conference of the IEEE
Industrial Electronics Society.
8. Moustafa-Azab, M. A. (2002). Estudio y realización del control directo del par (DTC) para accionamientos de motores de inducción con inversores de diferentes topologías, Tesis de
Doctorado, Universidad Politécnica de Cataluña.
9. Noguchi, T. and Takahashi, I. (1985). A New Quick Response and High Eficiency Control Strategy of an Induction Motor. Proceedings of the IEEE Annual Industry Applications Society Meeting, pp. 496-502.
10. Toh, C.L.; Idris, N.R. and Yatim, A.H.M. (2005) Constant and High Switching Frequency Torque Controller for DTC Drives. IEEE Power Electronics Letters, vol. 3, n. 2, pp. 76-80.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Author(s)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in the Journal of Advanced Multidisciplinary Studies (JAMS) are licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), unless otherwise stated. Authors retain copyright of their work and grant JAMS the right of first publication.
