Antimicrobial and Mechanical Effects of Aloe vera Extract Incorporation into Heat-Polymerized Acrylic Denture Base Resin: An In Vitro Study

Authors

  • Vera Oghionmwan University of Benin Teaching Hospital image/svg+xml Author
  • Jovita Ada Daniel Department of Orthotics and Prostheses, Federal University of Technology, Owerri, Nigeria Author
  • Etinosa Richard Eriamiatoe Department of Medical Microbiology, University of Benin Teaching Hospital, Benin City, Nigeria Author
  • Clare Uchenna Emeagha Department of Restorative Dentistry University of Calabar Teaching Hospital, Calabar , Nigeria Author
  • Ukwueze Regina Chidiebere Department of Dental Technology, Federal University of Technology, Owerri, Nigeria Author
  • Oshoke Inaboya Department of Family Dentistry, University of Benin Teaching Hospital, Benin City., Nigeria Author

Keywords:

Aloe vera; polymethyl methacrylate, denture base, antimicrobial activity, Candida albicans; flexural strength, flexural strength; impact resistance

Abstract

Background: Heat-polymerized polymethyl methacrylate (PMMA) is widely used for denture bases, but microbial colonisation and fracture remain important limitations. Aloe vera contains phytochemicals with potential antimicrobial activity; however, incorporation of plant-derived material may alter resin mechanics. This study evaluated antimicrobial activity, flexural strength and impact fracture energy of PMMA modified with different concentrations of Aloe vera extract.

Methods: This in-vitro study used 100 independent specimens allocated to four separate tests: Candida albicans (n=25), Staphylococcus aureus (n=25), flexural strength (n=25) and impact testing (n=25). Each test included five specimens at each concentration (0%, 3%, 5%, 7% and 10% w/w). Aloe vera inner-leaf material was extracted with absolute ethanol for approximately 24 hours, filtered and oven-dried at 40°C. The extract was incorporated into Pyrax heat-polymerized PMMA using a 2:1 polymer-to-monomer ratio (g:mL). Specimens were cured at 73–74°C for 1 hour 30 minutes, followed by 100°C for 30 minutes. Antimicrobial activity was assessed by exposure to organism-inoculated broth, serial dilution and viable colony enumeration. Flexural strength and impact fracture energy were also assessed.

Results: Alkaloids, tannins, saponins, flavonoids and anthraquinones were detected, while reducing sugars were not detected. Mean C. albicans counts decreased from 30.4 million CFU/mL in the control group to 68,000 CFU/mL at 10% Aloe vera. Mean S. aureus counts decreased from 40.4 million CFU/mL in the control group to 566,000 CFU/mL at 7%, although the 3% group had a higher count than the control. Overall differences in log₁₀-transformed microbial counts were significant for C. albicans (Welch’s F(4, 9.43)=6216.54, p<0.001) and S. aureus (Welch’s F(4, 9.58)=9203.34, p<0.001). Flexural strength decreased from 67.56 MPa in the control group to 55.40 MPa at 10%, with a significant difference among concentrations (H=23.03, df=4, p<0.001). Mean impact fracture energy also decreased from 0.282 J in the control group to 0.180 J at 10% (H(4)=22.62, p<0.001).

Conclusion: Aloe vera incorporation at 5–10% was associated with substantial reductions in recoverable microbial counts, alongside reductions in flexural strength and impact fracture energy. No concentration produced the best outcome across all measures. Further standardised testing, material characterisation and biocompatibility assessment are needed before clinical application.

 

 

Views: 0Downloads: 0

References

1. Ahmed MA, Al-Harbi FA, Gad MM, Fouda SM. Advances in polymethyl methacrylate denture base materials: mechanical, physical, and biological perspectives. Journal of Prosthodontic Research. 2023;67(2):210–222.

2. Alqutaibi AY, Baik A, Almuzaini SA, Farghal AE, Alnazzawi AA, Borzangy S, et al. Polymeric denture base materials: a review. Polymers. 2023;15(15):3258. doi:10.3390/polym15153258.

3. Ali Sabri B, Satgunam M, Abreeza NM, Abed AAN. A review on enhancements of PMMA denture base material with different nanofillers. Cogent Engineering. 2021;8(1):1875968.

doi:10.1080/23311916.2021.1875968.

4. Salim RH, Salloum AM, Alsalameh SA, Khazem MR, Hajeer MY. Antimicrobial properties of Aloe vera ethanol extract as a denture disinfectant: an in vitro study. Cureus. 2024;16(5):e59916. doi:10.7759/cureus.59916.

5. Abualsaud R, Gad MM. Flexural strength of CAD/CAM denture base materials: systematic review and meta-analysis of in-vitro studies. Journal of International Society of Preventive and Community Dentistry. 2022;12(2):160–170. doi:10.4103/jispcd.JISPCD_310_21.

6. International Organization for Standardization. ISO 20795-1:2013. Dentistry—Base polymers—Part 1: Denture base polymers. 2nd ed. Geneva: ISO; 2013.

7. Faot F, Panza LHV, Garcia RCMR, Cury AADB. Impact and flexural strength, and fracture morphology of acrylic resins with impact modifiers. The Open Dentistry Journal. 2009;3:137–143. doi:10.2174/1874210600903010137.

8. Vuksic J, Pilipovic A, Poklepovic-Pericic T, Kranjcic J. The influence of contemporary denture base fabrication methods on residual monomer content, flexural strength and microhardness. Materials. 2024;17(5):1052. doi:10.3390/ma17051052.

9. Hassan AA, El-Masry AA, Abdelrahman ME. Antifungal and antibacterial effects of Aloe vera extracts on acrylic denture base materials. International Journal of Dentistry. 2025;2025:Article 8843216. doi:10.1155/2025/8843216.

10. Zafa S. Polymethyl methacrylate as a denture base material: properties, modifications, and applications. European Journal of Dentistry. 2020;14(3):412–418.

Downloads

Published

2026-11-18

Issue

Section

Volume 1, Issue 4 (November 2026)

How to Cite

Antimicrobial and Mechanical Effects of Aloe vera Extract Incorporation into Heat-Polymerized Acrylic Denture Base Resin: An In Vitro Study (V. Oghionmwan, J. Ada Daniel, E. Richard Eriamiatoe, C. Uchenna Emeagha, U. Regina Chidiebere, & O. Inaboya, Trans.). (2026). Journal of Advanced Multidisciplinary Studies (JAMS), 1(IV), Page 705-714. https://jamsjournal.org/JAMS/article/view/951

Similar Articles

1-10 of 162

You may also start an advanced similarity search for this article.