Numerical Investigation of Natural Convection and Entropy Generation in a Square Enclosure Filled with Cu-Al₂O₃/Water Hybrid Nanofluid under a Uniform Magnetic Field
DOI:
https://doi.org/10.68050/JAMS.2026.961Keywords:
Natural convection, Entropy generation, Cu-Al₂O₃ hybrid nanofluid, Magnetohydrodynamics (MHD), Square enclosure, Finite Volume Method, Bejan numberAbstract
This numerical study investigates the magnetohydrodynamic (MHD) natural convection and total entropy generation of a Cu-Al₂O₃/water hybrid nanofluid contained within a two-dimensional square cabinet. The left vertical wall is maintained at a constant hot temperature Th, the right vertical wall is kept at a cold temperature Tc, and the horizontal top and bottom boundaries are thermally insulated. A uniform external magnetic field of strength B₀ is applied horizontally along the x-axis. The governing partial differential equations—expressing mass, momentum, thermal energy, and magnetic induction conservation—are rendered non-dimensional and solved numerically using the Finite Volume Method (FVM) coupled with the SIMPLE algorithm. The investigation explores a wide range of governing parameters: Rayleigh number (10³ ≤ Ra ≤ 10⁶), Hartmann number (0 ≤ Ha ≤ 60), and solid volume fraction of hybrid nanoparticles (0 ≤ φ ≤ 0.04). Thermo-physical properties of the hybrid nanofluid are evaluated using experimentally validated empirical correlations accounting for nanoparticle interactions. Results demonstrate that increasing Rayleigh number enhances natural convective flow, local and average Nusselt numbers (Nu), and overall entropy generation. Conversely, an increased magnetic field strength (higher Ha) suppresses fluid motion via Lorentz forces, dampening thermal performance and total entropy production. Additionally, adding Cu-Al₂O₃ hybrid nanoparticles significantly enhances heat transfer rates compared to single-component nanofluids and pure water. Analysis of the Bejan number (Be) reveals a shift from thermal-irreversibility domination at low Ha to magnetic/viscous-irreversibility control at elevated magnetic field intensities.
References
1. Ghalambaz, M., Hashem Zadeh, S. M., Veismoradi, A., Sheremet, M. A., & Pop, I. (2021). Free convection heat transfer and entropy generation in an odd-shaped cavity filled with a Cu-Al2O3 hybrid nanofluid. Symmetry, 13(1), 122. https://doi.org/10.3390/sym13010122
2. Tayebi, T., & Chamkha, A. J. (2020). Entropy generation analysis during MHD natural convection flow of Cu-Al2O3/water hybrid nanofluid in a square cavity. Entropy, 22(1), 85.
3. M. Sheikholeslami, M. G. Bandpy, D. D. Ganji, S. Soleimani, S. M. Seyyadi, Natural convection of nanofluids in an enclosure between a circular and a sinusoidal cylinder in the presence of magnetic field, International Communications in Heat and Mass Transfer 39 (2012) 1435–1443.
4. Kardgar, A. (2023). Natural convection and entropy generation of non-Newtonian hybrid Cu-Al2O3/water nanofluid in an inclined partial porous cavity with different local heater positions in the presence of magnetic field. Journal of Heat and Mass Transfer Research, 10(2), 279–300. https://doi.org/10.22075/jhmtr.2023.30638.1442
5. Selimefendigil, F., & Öztop, H. F. (2020). Effects of conductive curved partition and magnetic field on natural convection and entropy generation in an inclined cavity filled with nanofluid. Physica A: Statistical Mechanics and its Applications, 540, 123004.
6. de Vahl Davis, G. (1983). Natural convection of air in a square cavity: A bench mark numerical solution. International Journal for Numerical Methods in Fluids, 3(3), 249–264.
7. Brinkman, H. C. (1952). The viscosity of concentrated suspensions and solutions. The Journal of Chemical Physics, 20(4), 571–571.
8. Maxwell, J. C. (1873). A Treatise on Electricity and Magnetism. Oxford: Clarendon Press.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Author's

This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in the Journal of Advanced Multidisciplinary Studies (JAMS) are licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), unless otherwise stated. Authors retain copyright of their work and grant JAMS the right of first publication.
